Step by step to fix error code 1322 on printer Canon GP-300, GP-200 and Canon GP-5300, GP-5200

[Lưu Ngọc Thiện]

Tôi đang tìm cách giải quyết vấn đề liên quan đến. Máy in model GP-300, GP-200, GP-5300, GP-5200 gặp lỗi "Cannot detect paper size because paper is not in the correct position or because curled paper has been loaded."... Cần step by step to fix error code 1322 on printer canon gp-300, gp-200 and canon gp-5300, gp-5200

 

[Lưu Ngọc Thiện]

Cannot detect paper size because paper is not in the correct position or because curled paper has been loaded.

 

[Lê Thuận Thành]

Cannot detect paper size because paper is not in the correct position or because curled paper has been loaded.

 

[Vương Hoài Thanh]

Cannot detect paper size because paper is not in the correct position or because curled paper has been loaded.

 

[Phạm Huệ My]

Cannot detect paper size because paper is not in the correct position or because curled paper has been loaded.

 

[Võ Hoàng Cúc]

Tip back the release lever and remove any paper. Then check the paper and reload it. Loading Rolls in the Printer Loading Sheets in the Printer If "There is a job which has not been printed yet. Do you want to print this job?" appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Note If this error appears again even after reloading the paper roll, remove the roll holder from the printer, insert the paper roll firmly into the roll holder until it is up against the flange, and then insert the roll holder into the printer. Loading Rolls on the Roll Holder This error might also appear if the platen has been dirtied by ink or another substance, or if the size of clear film could not be detected. In this case, open the top cover and clean the entire platen area. Cleaning Inside the Top Cover

 

[Tạ Hương Xuân]

Paper that has been cut remains on the output guide Follow the steps below to resume printing. Lift up the release lever and remove the paper. Load the paper. Lower the release lever. If "There is a job which has not been printed yet. Do you want to print this job?" appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Removing the Upper Roll from the Printer Removing the Lower Roll from the Roll Unit (Option) A foreign object near the output slot is obstructing the cutter blade Follow the steps below to resume printing. Open the top cover and remove any foreign objects. If "There is a job which has not been printed yet. Do you want to print this job?" appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Paper not being used under the recommended usage conditions Every paper type has different recommended conditions of use. Use all paper under its recommended usage conditions. See the media information list for recommended usage conditions. Paper Information List The paper in use cannot be used with Automatic cut Set the roll paper cutting method to User cut and cut the roll paper with a cutting implement such as scissors. Specifying the Cutting Method for Rolls See the media information list for paper types that can be used with Automatic cut. Paper Information List If this does not apply, there may be a cutter blade malfunction. Contact your Canon dealer for assistance.