Reply to thread

Message

<blockquote data-quote="Vũ Hữu Cảnh" data-source="post: 1807" data-attributes="member: 493"><p>The roll paper has run out Follow the steps below to replace the used roll with a new roll of the same type and size. Tip back the release lever and remove the roll paper. Removing the Roll from the Printer Load the new roll. Loading Rolls in the Printer If &quot;There is a job which has not been printed yet. Do you want to print this job?&quot; appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Feed stopped because the end of the paper roll is attached to the core with tape Remove the used roll paper and insert a new roll paper. Removing the Roll from the Printer Loading and Printing on Rolls Feed stopped because the remaining paper roll is too heavy It may be helpful to change the printing mode, which will change the paper feed timing. If using Windows, select a higher Print Quality setting under Advanced Settings in the printer driver. If using macOS, select Quality &amp; Media in the printer driver, and then select a higher Print Quality setting. Setting the Print Quality Level (Custom) (Windows) Setting the Print Quality Level (Custom) (macOS) Note To stop printing, press the Stop button.</p></blockquote><p></p>

[QUOTE="Vũ Hữu Cảnh, post: 1807, member: 493"] The roll paper has run out Follow the steps below to replace the used roll with a new roll of the same type and size. Tip back the release lever and remove the roll paper. Removing the Roll from the Printer Load the new roll. Loading Rolls in the Printer If "There is a job which has not been printed yet. Do you want to print this job?" appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Feed stopped because the end of the paper roll is attached to the core with tape Remove the used roll paper and insert a new roll paper. Removing the Roll from the Printer Loading and Printing on Rolls Feed stopped because the remaining paper roll is too heavy It may be helpful to change the printing mode, which will change the paper feed timing. If using Windows, select a higher Print Quality setting under Advanced Settings in the printer driver. If using macOS, select Quality & Media in the printer driver, and then select a higher Print Quality setting. Setting the Print Quality Level (Custom) (Windows) Setting the Print Quality Level (Custom) (macOS) Note To stop printing, press the Stop button. [/QUOTE]

Verification

Liên Hệ Zalo 0915589236 Để Đăng Ký !