Step by step to fix error code 1024 on printer Canon GP-300, GP-200 and Canon GP-5300, GP-5200

[Cao Minh Ân]

Chào mọi người, tôi muốn hỏi ý kiến của các bạn về cách giải quyết vấn đề này và mong muốn được sự giúp đỡ của mọi người.. Máy in model GP-300, GP-200, GP-5300, GP-5200 gặp lỗi "Possible causes include the following. Roll paper is empty. There is remaining roll paper, but because it could not be advanced, it could not be detected."... Cần step by step to fix error code 1024 on printer canon gp-300, gp-200 and canon gp-5300, gp-5200

 

[Cao Minh Ân]

Possible causes include the following. Roll paper is empty. There is remaining roll paper, but because it could not be advanced, it could not be detected.

 

[Phan Ngọc Khánh]

Possible causes include the following. Roll paper is empty. There is remaining roll paper, but because it could not be advanced, it could not be detected.

 

[Vũ Hữu Cảnh]

The roll paper has run out Follow the steps below to replace the used roll with a new roll of the same type and size. Tip back the release lever and remove the roll paper. Removing the Roll from the Printer Load the new roll. Loading Rolls in the Printer If "There is a job which has not been printed yet. Do you want to print this job?" appears on the touch screen, tap Yes. Printing will resume, starting from the page on which the error occurred. Feed stopped because the end of the paper roll is attached to the core with tape Remove the used roll paper and insert a new roll paper. Removing the Roll from the Printer Loading and Printing on Rolls Feed stopped because the remaining paper roll is too heavy It may be helpful to change the printing mode, which will change the paper feed timing. If using Windows, select a higher Print Quality setting under Advanced Settings in the printer driver. If using macOS, select Quality & Media in the printer driver, and then select a higher Print Quality setting. Setting the Print Quality Level (Custom) (Windows) Setting the Print Quality Level (Custom) (macOS) Note To stop printing, press the Stop button.